Free-Delivery Split Heat Pump

Free-Delivery Split Heat Pump, Packaged Terminal Heat Pump, Self-Contained Through-theWall Heat Pump, Window Heat Pump System Inspection Procedures
Inspector shall verify the free-delivery split heat pump, packaged terminal heat pump, self-contained through-the-wall heat pump, and window heat pump adhere to installation standards. (See Installation Standards for certain sections that do not apply.) In addition, inspector shall verify the following: • Air flow is as recommended by the manufacturer. • Integral auxiliary electric heat is provided by the manufacturer within the unit cabinet or fan coil section as part of the heat pump. • Integral auxiliary heaters are controlled by the heat pump indoor thermostat. • Installing QCN member has met manufacturer's instructions for the complete installation of the system, including any recommended parts and accessories and any necessary wall/window case. • The joint around the unit case (between the case and wall or window) to ensure weathertight seal with caulk, seals, or gaskets, as provided by the manufacturer. • Cabinets are checked for proper alignment and any unnecessary holes. Holes allowed are for the manufacturer's approved internal condensate drain system (condensate drain lines shall be sized in accordance with the manufacturer's recommendations and all instances at least as large as the heat pump's drain connection).